TSM500i and TsmWeb User Guide (PCI HSM v3) (PR-D2-1037 Rev 1.1)
| Page 36
Zazoo Limited, Co. No 9265606 | Directors: Dr S C P Belamant (French),
Mr H G Kotze, Mr P M Belamant | Company Secretary: Ms C W van Straaten
www.zazooltd.com
4.7
NSS LCD Menu
The LCD’s MAIN MENU allows the following settings to be modified: IP Address, Netmask, default gateway,
USB Backup & Restore, Disable SSL/TLS and Resetting of parameters such as Admin Password and factory
default settings.
The LCD Main Menu on the TSM500i-NSS may be accessed by powering the TSM500i-NSS off and then on
again. Watch the LCD display and, when prompted, press and hold down the red
button and green
button
on the front panel until a MAIN MENU appears on the LCD display. The arrow keys may be used to select the
required
option.
For details on how to navigate and use the MAIN MENU, refer to section 2.6.1 or
Resetting any of the TSM500i-NSS settings described here has NO effect on the TSM500i Hardware
Security Module (HSM). Refer to the block diagram in Section 1.2 to see how the HSM is physically
separated from the embedded computer system.
No keys or Crypto Officer passwords that are stored inside the TSM500i HSM will be lost when
performing the procedures detailed in this section.
The settings that may be changed are:
Admin Password Reset
- refer to section 2.7.3.2
Set IP Address, Netmask, default gateway
- refer to section 2.6.1
USB Backup & Restore
- refer to section 2.12
Reset to Defaults
- refer to section 4.9
Disable SSL/TLS, reset TLS key
- refer to section 4.11