Zaxcom ZFR100, Руководство пользователя

Страница: 25 / 71

Zaxcom Miniature Digital Recorder User’s Manual____________________________________Chapter 2
25
Power-up Mode page
POWER UP MODE:
UNLOCKED
Page purpose: This page sets whether or not the unit will power up with the keys locked
Parameters:
 LOCKED
– The keys are locked upon power-up.
 UNLOCKED
– The keys are unlocked upon power-up.
This page works like the Lock page {p.21}. The only difference is that while the unit is locked using Power-up
Mode , every time it is powered up, the keys will be locked and it will be necessary to unlock them before you can
view/change anything.
Unlocking the recorder
Simultaneously press the MENU and INC keys. Once it is unlocked, the screen will display the Transport
Control page {p.18}.
Media Erase & Format page
PRESS UP KEY 5X
TO ERASE CARD
SUCCESS (REBOOT)
#### MBYTES
FORMAT FAILED
ERROR ##
Page purpose: This page erases and formats a MiniSD card.
This must be done before the card can be used (or to erase the contents) in the recorder.
To Format a card:
1. Before formatting the card, enter the name ( Track Name page {p.29}) to be used for this card.
2. With the power „OFF‟, insert the memory card into the media slot with the label to the back of the unit. Press
it all the way in; it will lock down.
3. Press and hold the MENU key while the recorder is powered up.
4. Repeatedly press the MENU key until the screen displays
PRESS UP KEY 5X TO ERASE CARD
.
5. Press the INC key 5 times. (displays
FORMATTING FAT32
)
6. Sometime later displays
ERASING SEGMENTS
.
7. And finally displays
SUCCESS #### MBYTES
or
FORMAT FAILED ERROR ##
, where
####
indicates the space on the card available for recording and
##
is one of the following error codes:
Error Code Description
- 1 No SD card found
- 2 No FAT32 format found
- 3 Invalid SD card sector size
Table 2-7 Format Error Codes
Be sure the recorder displayed
SUCCESS #### MBYTES
before using it to record.
If the recorder displayed
FORMAT FAILED ERROR ##
, do not use the card in the recorder.
8. Once the Success message (see above) appears, you will need to reboot so the unit can mount the card.
To Recreate the wrapper files (will not destroy existing audio takes):
Repeat each of the steps above, but substitute the following for step 5:
5.
Press the DEC key 9 times. (displays
FORMATTING FAT32
)