Zaxcom URX100, Руководство пользователя, Страница: 17 / 26

Zaxcom URX100 Set Up Menu
17
OLED Brightness
The OLED brightness menu adjusts the brightness of the OLED display. The brightness can be adjusted from 0 to
3 with 0 being the dimmest setting and 3 being the brightest.
Information Page
This page displays the current firmware version and the serial number of the URX100.
Hide Encryption Menu
This menu allows for the encryption menu to be hidden preventing accidental changes.
•
HIDDEN - The encryption menu does not appear when cycling through the menu settings.
•
SHOW
- The encryption menu will appear.
Encryption Code Set
This menu is where the encryption is turned on and the code is set. This code needs to match the encryption
code of the associated transmitter(s). If an encryption code is set on the transmitter the transmitted audio will
be encrypted and can only be listened to if the URX100 has the same matching encryption code entered. When
the codes do not match, all that will be heard is white-noise.
These two sets of numbers are formed into a single six-digit encryption code which provides a total of
16,777,216 possible combinations
.
For non-encrypted operations all six numbers should be set to 0.
Adjusting the encryption code
1.
Press the menu key to cycle to the next character.
2.
To change the designated character, press the CH UP or CH DOWN key.
3.
To exit this page, press and hold the MENU key.
ENCRYPTION MENU:
HIDDEN
ID1: 000 ID0: 000
ENCRYPTION CODE
OLED BRIGHTNESS:
3
- - - INFO - - -
FIRMWARE 0-53
SN: 1234
URX-100