Zaxcom URX100, Руководство пользователя, Страница: 16 / 26

Zaxcom URX100 Set Up Menu
16
Software Update
This menu is where the URX software is updated from.
When in this menu pressing the CH UP key will initiate the update process and the URX100 will wait and search
for software that will be transmitted from a Zaxcom transmitter (please refer to the software update section of
this manual for more information on how to update the URX100.)
IFB voting
The IFB voting feature will allow the URX100 to automatically switch to a secondary frequency when it loses its
signal from the primary transmitter. One purpose of this is, on a large set, a second transmitter can be placed
at a distant location, so if the URX100 loses the signal from one transmitter it will automatically switch to the
other transmitter.
To use IFB voting just set the offset in this menu to (200 KHz, 300 KHz, 400 KHz or 500 KHz). Then set the
second transmitters frequency to the primary fre the offset. So for example if the primary frequency
is 560.000 MHz and the offset is 200 KHz then the second transmitter should be set to 560.200 MHz
Audio Delay Set
The audio delay menu sets a variable delay to the output audio. A delay is useful if the ERX is being used for
personal monitoring and there is a video processing delay to the monitors - so engaging the delay will delay the
audio to match the video. The audio delay can be adjusted from 1MS to 400MS in 1MS increments.
Display Flip
The display flip menu changes the orientation of the display for when the unit will be inverted.
Battery Type
The chemistry of the batteries being used in the URX100 is selected in this menu. Alkaline, NiMH or Lithium can
be selected
DISPLAY FLIP:
OFF
PRESS TO
UPDATE SOFTWARE
IFB VOTING: ON
200KHZ OFFSET
AUDIO DELAY:
OFF
BATTERY TYPE:
LITHIUM