Zaxcom Nova Front Panel
6
Nova
Front Panel
Record Key
Press to put Nova into record. The press duration is set in the ENG advanced menu. When Nova is recording the
REC key will glow red.
Stop Key
Press to stop recording or stop playback. The press duration is set in the ENG advanced menu. When stopped
the STOP key will glow blue.
Play / Input key
•
A quick press will enter the input setup menu.
•
Press and hold will play back the last recorded file. The press duration is set in the ENG advanced menu.
When playing back the REC and STOP key will flash green.
TC / Bank key
•
A quick press will cycle through the banks and the key will glow the color associated with the fader bank.
Please note if nothing is assigned to a bank that bank will not be cycled through.
•
Press and hold will open TC menu, additional presses will cycle through the additional TC menus.
Tracks / Trim
•
A quick press will cause the TRIM key to blink. When the key is blinking the input trim for the source that is
assigned to a fader can be adjusted by turning that fader. Pressing the BANK will allow for adjustments to
other input trims for those banks. Pressing the TRIM key again will take Nova out of trim mode.
•
Press and hold will open the track assign menu.
ZNET / Z-Net
•
A quick press will cause the ZNET key to blink. When the key is blinking turning the fader that has a Zaxcom
transmitter assigned to it will remotely adjust the input gain for that transmitter via ZaxNet. Pressing the
ZNET key again will take Nova out of ZaxNet remote gain mode.
•
Press and hold will open the ZaxNet setup menu for the internal ZaxNet transmitter.
Back key
Press to go back one menu.
