Zaxcom Nova Right Side Panel
10
Right Side
ZaxNet Antenna Connector (SMA)
RS422 connector future functionality
RF loop thru connectors (SMA) x 2
These are post 35MHz filter RF connectors to connect additional receivers.
Analog Mic/Line input connectors (XLR-3F) x 4
External Power Connector (Hirose-4F) x 2
This are redundant input power connector so that two batteries can be connected. Nova will automatically
switch to the higher voltage source.
Nova will run on 10 to 18 VDC
WARNING:
Do NOT connect the external power connector to a source higher than 18.0 VDC.
This is the ABSOLUTE upper limit. Anything higher can damage the unit’s power supply.
