Oasis Scene and Take Metadata
15
Scene and take list
The scene and take list will display the previous scene and
take metadata. That scene and take metadata can be edited
directly from this list. Any changes to the scene and take will
be automatically made to the primary card. Please note if a
file has already been mirrored, and a change is made to the
scene or take, that segment will need to be re-mirrored for
the changes to be reflected on the mirror card.
Navigating the scene and take list
The up and down arrow will scroll through the list.
Selecting the
LAST SEGMENT
key will jump to the top of the
list.
Selecting the
ENTER SEGMENT
will open a text editor so a
specific segment number can be entered. That segment
number will jump to the top of the list so the metadata
can be altered.
Movie Slate interface
Nomad touch will communicate scene and take information
with any Movie Slate app that is running on set.
When the scene and take data is received via Move Slate
tapping on the
ACCEPT
key will accept and input that
metadata. Oasis can also be set to always accept the scene
and take information by changing the
CONTINUITY
key from
APPROVE
to
ALLOW
. This will grey out the accept key since any
incoming information will no longer need to be accepted.
