Zaxcom Control Surfaces User’s Manual _____________________________
________________
Chapter 3
13
phantom power options, EQ, channel assignments, channel delay and more. Pressing the
CH
key again, takes you
back to the page you were previously on.
Figure 3-4 Input (#) page – (Analog/Digital)
CH key Shortcuts
EQ
page – Pressing the
CH
key changes which of the five filters is being controlled by the jog wheel.
Pressing the
CH
key moves the control knob to the next filter.
BUS
page – Pressing the
CH
key toggles the cross point.
Linear fader
To use the faders on the Mix-12, you must set up the audio to be routed to the output busses post fader. They
cannot be used when the recorder audio is routed using the pre-fader option.
Faders 9 through 12
Deva/Fusion recorders have only eight microphone inputs. However faders 9 through 12 allow you to use the
four AES digital inputs on the recorder for additional inputs. You can assign these digital inputs to any track or
place them on any output pre- or post-fader.
If you would like to use these for additional microphone inputs, you need to use an external A/D converter.
When using an external ADC, the word clock on the Deva feeds the external converter, so it is in sync with the
recorders clock. You always want the recorder’s clock to be the master when using an external ADC.
Keyboard
The built-in QWERTY keyboard can be used to enter metadata. Also, see the “Shortcut Keys” chapter in your
Deva or Fusion User Manual.
OUT# rotary faders
Both analog and digital output levels of busses 1 through 4 are controlled by the
Out#
rotary faders, which are
adjustable from infinity to 0 dBu (clockwise). These busses should be used to feed Comteks or any device where
an output level adjustment is necessary.
You cannot adjust the level of outputs 5 and 6 from the Mix-12.
REC and STOP keys
The
RECORD
and
STOP
keys on the Mix-12 are identical to those on the Deva/Fusion and reflect the current
transport status of the recorder itself.
TONE key
The
TONE
key toggles Tone On and Off. The key lights when Tone is active.
Reassigning the Tone Key
The
TONE
key can be reassigned in the
Mix12 Setup
page on your recorder to perform one of the following
functions:
Tone
Home Screen key
Escape
Play
