Zavio D8220, Руководство пользователя

Страница: 12 / 46

12
5.2 Network
By default the camera is set to automatically obtain the necessary IP information from the DHCP server
(e.g. the router). However, you may manually change the IP address and other related settings.
5.2.1 TCP/IP
Internet Protocol Version 4(TCP/IPv4):
Obtain an IP address automatically (DHCP) – This is the default setting. In this mode the camera
obtains the IP information from the DHCP server.
Use the following IP address – Select this option to assign a static IP address to the camera.
Obtain DNS server address automatically – automatically use the DNS server settings provided by
the DHCP server.
Use the following DNS server address – Select this option to assign a DNS server address. When
DHCP is disabled, you also need to provide the camera with valid DNS settings.
Internet Protocol Version 6(TCP/IPv6):
IP address – The IPv6 IP address of camera is automatically assigned by converting the MAC address
of the IP camera. Users are unable to modify it.
HTTP:
HTTP port number – The default value is 80. If you changed the HTTP port to a different value (e.g.
1024), please make sure to restart the camera (Settings

System

Maintenance) and then
connect to the camera using the following URL http://camera_ip:portnumber.