Zato CAYMAN FCE II Series, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 37 / 96

37 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
4.16
INforMatIoN aNd warNINGs applIEd
The attachment is equipped with safety signs composed of adhesive labels (pictograms) bearing information
and warnings�
These labels do not substitute the information contained in this manual, nor may they be considered to be
sole and sufficient instructions�
The Manager must make sure the labels applied to the attachment are kept in perfect conditions�
At the first sign of deterioration, they must be replaced immediately, making the request to the
Manufacture according to the procedure described in
“2.8.3 requesting spare parts” on page
17 �
do not remove, damage or make the safety signs applied to the attachment illegible�
Refer to fig. 10 on page 38 , unless otherwise specified�
The information and warnings applied on the attachment are shown in the table below�
pictogram description position
Danger of crushing upper limbs� 1
Danger of cutting upper limbs� 1
Risk of contact with hot surfaces� 2
Danger of liquids under pressure being ejected� 3
Warning to keep at least 25m away from the machine and attachment
during operation�
4
Obligation to read the Manual thoroughly before carrying out any ope-
rations on the attachment�
5
6
7
8
Indication of the lifting point�
2a - fig. 11 on
page 40
tab. 8 Information and warnings applied
The Customer must set up an "out-of-service" sign during maintenance and attachment downtime, which
indicates that the attachment is not running and forbids unauthorised people from using the attachment�