22
Quick Start Guide
Firmware Upgrade
To access the Firmware upgrade page and update the firmware online or via USB, please press the
BLUE
button of the RC. To check for the most recent changes, latest firmware version and get recove-
ry firmware, please visit our website at:
zappiti.com/firmwares
.
Factory Reset
In some cases, a factory reset may be required.
Be careful, however, this will reset all your Zappiti settings and account information.
1. Turn on your Zappiti 4K HDR.
2. Click the
My App
button, then click the
Factory Reset
icon, then confirm the procedure.
3. Please wait during the reset process.
Warning!
The first restart of the media player is very long! After the reset, the home page will appear
on the screen but the apps and controls will be not available for a couple of minutes. You must wait for
this process to complete. If this process is stopped for any reason or if mediaplayer is switched off, you
must wait at least 10 minutes before you attempt procedure again.
Firmware Restore Procedure Using USB Restore Stick
Warning! This procedure will reset all your personal settings and account information. Carefully
read all of this procedure first! Then please follow the process step by step.
1. Open the accessory box and take off the provided USB
Flash drive named ‘‘
Restore
’’.
2. Switch off the Zappiti player using the
Power On / Off
button located on the back panel.
3. Connect the USB flash drive into the USB port of the
media player located on the left side next to the ‘‘
Restore
’’
button and disconnect the network cable.
4. Then press the ‘‘
Restore
’’ button by using a paper clip
(small hole located behind the left rack enclosure). While
holding the reset button, turn on the player via the power
button located on the back of the Zappiti. Continue to hold the
restore
button for at least 6 seconds after you power on, then
release it. A ‘‘
Z
’’ logo will appear during 30 sec. Then, the
upgrade process will start and a progress bar will be
displayed on the screen.
5. WARNING! Do not turn off the media player before the full reset.
DISCLAIMER
On some cases — especially if you come from a more recent firmware — during
the process, the TV screen can switch to
GREEN
or
BLACK
for a while. This is
normal! Please absolutly not restart or switch off your Zappiti during the full
process. In such case, please wait 10 min before to restart your Zappiti unit.
Restore
Restore
Paper clip
Openned
Paper clip
POWER
