10
Quick Start Guide
HDMI Cable
HDMI Cable
Audio Coaxial and Optical
If your AV receiver is not compatible with HDMI, you can connect your Zappiti to your AV receiver using
SPDIF optical (Toslink) or coaxial outputs as following:
If your AV receiver is not compatible with 4K HDR, please use the HDMI Audio Only output as following:
Zappiti back panel
If your AV receiver is not compatible HDMI
please connect one of these cables:
SPDIF Optical (Toslink) cable
Coaxial cable
Coaxial In
Optical In
AV Receiver not compatible
with HDMI
Headphone
Wireless Headphones:
For video playback without audio-video sync issue, please
choose a wireless headphones compatible with
Apt-X Low Latency
technology.
Connect your headphone
to the 6.35 mm (1/4 inch) input
located on the front panel.
Headphone
Zero Signal
The Zero Signal is a feature dedicated to
optimize audio and video quality without
signal transmission. By connecting the
Zero Signal output with a free audio or
video input of your AV receiver, the
reference level (GND) of the audio and
video signals is aligned between the two
devices. The potential difference is
suppressed, allowing a precise and
high-quality signal transmission. It also
removes the ground loop effects.
Zappiti back panel
HDMI OUT (Main)
HDMI OUT (Audio Only)
Zero Signal
AV Receiver
HDMI IN
FREE IN
HDMI IN
TV / projector
