DSP-IV II Series
Quick Start Guide
Congratulations on the purchase of your new Zapco DSP-Z8 IV series product.
Please go to www.zapco.com to download the PC Control Program. You will also find the User’s Manual on the web
site for download (Sept, 2018). Also, please check back periodically for any new updates to programs or apps. If you
are experienced with DSP and you want to jump right into the installation and tuning, we provide this Fast-Start
sheet to give you the basic info you need to get up and running right away.
DSP-Z8 IV II - Digital Processor Physical Connections
1. RCA connectors for 8 output channels - 2. Swt. for speaker level or RCA level inputs - 3. Main-In RCA input connectors - 4. Auxiliary RCA input
connectors - 5. On/Off Swt for Auto Turn-On - 6. Six ch. Speaker level main input connector - 7. Port for dash remote, and future expansion.
8. USB-B port for PC control program - 9. Digital port for Optical SPDIF input - 10. Power connector for Batt +12V (Yellow), Ground (Black),
+12v for Turn-on (Red) and +12v out for amplifier turn-on (Blue) - 11. Bluetooth Antenna for digital music streaming.
ADSP-Z8 IV-8 Processor/Amplifier Physical Connections
1. Six Channel Main Input RCA Connectors - 2. Two Channel Aux Input RCA Connectors - 3. Digital port for Optical SPDIF Input - 4. Port for
standard dash remote and future expansion, optional - 5. USB-B port for PC control program - 6. Six Channel speaker level input plug - 7.
On/Off Swt. For Auto Turn-on - 8. Swt for Balanced or un-balanced RCA inputs - 9. Speaker output connectors for channels 5~8 - 10. Speaker
output connectors for channels 1~4 - 11. Amplifier power, ground, and turn-on connectors.
Amplifier power: 80 watts RMS/ch, 4 ohms - 120 watts RMS/ch, 2 ohms - 240 watts RMS/bridge, 4 ohm.
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
8
7
9
10
11
