Zanussi ZWS 3121, Руководство пользователя

Страница: 14 / 24

1. Open the pump
door.
2. Put a container
below the recess
of the drain
pump to collect
the water that
flows out.
3. Unscrew the fil-
ter to let the wa-
ter flow out.
4. When the container is full of water,
screw the filter again and empty the con-
tainer. Do steps 3 and 4 again and again
until no more water flows out from the
drain pump.
1
2
5. Unscrew the fil-
ter and remove it.
6. Remove fluff and
objects from the
pump.
7. Make sure that
the impeller of
the pump can
turn. If this does
not occur, con-
tact the service
centre.
1
2
8. Clean the filter
under the water
tap and put it
back in the
pump.
Caution! Make
sure that you
tighten correctly the
filter to prevent leak-
ages.
9. Close the drain pump door.
Clean the inlet valve filter
It could be necessary to clean the filter when:
• The appliance does not fill with water.
• The appliance fills with the water for a long
time.
Warning! Disconnect the mains plug from
the mains socket.
To clean the filter:
• Close the water tap.
• Remove the inlet hose behind the appli-
ance.
• Clean the filter in the valve with a stiff
brush or a towel.
14
www.zanussi.com