manualshive.com logo in svg

Zanussi ZWD 14791 W, Руководство пользователя, Страница: 29 / 36

Поделиться
Скачать
Zanussi ZWD 14791 W Скачать руководство пользователя страница 29

Caution! Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

Water inlet

Warning! This appliance must be connected to a

cold water supply.

1. Connect the water inlet hose supplied with the ma-

chine to a tap with a 3/4" thread. Always use the

hose supplied with the appliance.

Important! Do not use the hose from your previous

machine to connect to the water supply.
2. The other end of the inlet hose which connects to the

machine can be turned as showed in the picture.

Do not place the inlet hose downwards.

Angle the hose to the left or right depending on the

position of your water tap.

3. Set the hose correctly by loosening the ring nut. Af-

ter positioning the inlet hose, be sure to tighten the

ring nut again to prevent leaks.

The inlet hose must not be lengthened. If it is too short

and you do not wish to move the tap, you will have to pur-

chase a new, longer hose specially designed for this type

of use.
Important! Before connecting up the machine to new

pipework or to pipework that has not been used for some

time, run off a reasonable amount of water to flush out any

debris that may have collected in the pipes.

Warning! Installation should comply with local

water authority and building regulations’

requirements.

The appliance must be connected to a cold water supply.

A minimum water pressure of 0.05 MPa (0.5 bar) is

required for safe operation of the appliance.

If you cannot make the cold water connection direct from

the rising mains, you may be able to operate the appliance

from your cold water storage system.

There should be a minimum vertical distance of 5.02 m

(16.5 ft) between the appliance’s inlet and the bottom of

the water storage tank.

Water drainage

This appliance is designed to be permanently plumbed in-

to your home's drainage system using one of the follow-

ing methods.

1. Into a drainage standpipe

Firstly form a hook in the end of the drain hose using the

“U” piece” supplied.

 

29

Содержание ZWD 14791 W





































Отзывы:

Нет отзывов