22
Something not working?
Certain problems are due to lack of simple maintenance or oversights, which
can be solved easily without calling out an engineer. Before contacting your
local Service Centre, please carry out the checks listed below.
During machine operation it is possible that the
red
“Start/Pauze” pilot light
flashes to indicate that the machine is not working.
Once the problem has been eliminated, press the “
Start/Pauze”
button to
restart the programme. If after all checks, the problem persists, contact your
local Service Centre.
Malfunction
Possible cause
Solution
Dryer does not work.
•Mains plug is not
plugged in or fuse is
not working correctly.
•Loading door is open.
•Have you pressed the
START/ PAUZE
button?
•Plug in at mains socket.
Check fuse in fuse box
(domestic installation).
•Close loading door.
•Press the
START/PAUZE button
again.
Drying results
unsatisfactory.
•Wrong programme
selected.
•Lint filter clogged.
•Heat exchanger clogged
with lint.
•Incorrect volume of
laundry.
•Ventilation slots in base
area covered up.
•Residue on inside
surface of drum or
drum ribs.
•Conductance of water
at installation site
differs from standard
setting of machine.
•Select a different
programme the next time
you dry (see “Overview of
programmes” section).
•Clean lint filter.
•Clean heat exchanger.
•Observe recommended
loading volumes.
•Uncover ventilation slots
in base area.
•Clean inside surface of
drum and drum ribs
•Re-programme standard
setting for degree of
drying (see
‘Programming options’
section).
