Zanussi ZTE 171, Руководство пользователя

Страница: 27 / 32

5) only dryers with the LCD
6) Note: After around 5 hours the drying cycle ends automatically (see
Drying cycle complete
section).
Machine settings
Setting Implementation
BUZZER permanent off 1. Turn the programme selector to any programme.
2. Press simultaneously the DELICATE and LONG ANTI-CREASE buttons
and hold down for approx. 5 seconds.
3. The buzzer is by default always off.
Water hardness
Water contains, a variable quanti-
ty of limestone and mineral salts
of which quantities vary accord-
ing to geographical locations
thus varying its conductivity val-
ues.
Relevant variations of the conduc-
tivity of the water compared to
those prefixed by the factory
could slightly influence the resid-
ual humidity of the laundry at the
end of the cycle. Your dryer al-
lows you to regulate the sensitivi-
ty of the drying sensor based on
conductivity values of the water.
1. Turn the programme selector to any programme.
2. Press simultaneously the LONG ANTI-CREASE and START/PAUSE but-
tons and hold down for approx. 5 seconds. Lights show the current setting:
– Tank - low conductivity <300 micro S/cm
– Filter - medium conductivity 300-600 micro S/cm
– Condenser - high conductivity >600 micro S/cm
3. Press the START/PAUSE button sequentially until you set desired level.
4. To memorize setting press simultaneously the the LONG ANTI-CREASE
and START/PAUSE buttons or turn knob to OFF off position
Technical data
Parameter Value
Height x width x depth 85 x 60 x 58 cm
Drum volume 108 l
Depth with loading door open 109 cm
Height can be adjusted by 1.5 cm
Weight when empty approx. 40 kg
Loading volume (depends on programme)
1)
max. 7 kg
Voltage / Frequency 230V / 50Hz
Required fuse 13A
Total power 2350 W
27