Zanussi ZTE 171, Руководство пользователя

Страница: 18 / 32

Important!
• The hot air emitted by the tumble dryer can reach tem-
peratures of up to 60°C. The appliance must there-
fore not be installed on floors which are not resistant
to high temperatures.
• When operating the tumble dryer, the room tempera-
ture must not be lower than +5°C and higher than
+35°C, as it may affect the performance of the appli-
ance.
• Should the appliance be moved, it must be transpor-
ted vertically.
• The appliance must not be installed behind the lock-
able door, a sliding door a door with a hinge on the
opposite side to that of the appliance in such a way
that a full opening of the dryer is restricted.
Removing transport safety packaging
Caution! Before use all parts of the transport
packaging must be removed.
1. Open loading door 2. Pull off adhesive strips
from inside machine on
top of drum.
3. Remove foil hose and polystyrene padding from
the machine.
Electrical connection
Details on mains voltage, type of current and the fuses
required should be taken from the rating plate. The rat-
ing plate is fitted near the loading aperture (see “Prod-
uct description” chapter).
Connect the machine to an earthed socket, in accord-
ance with current wiring regulations.
Warning! The manufacturer declines any
responsibility for damage or injury through failure
to comply with the above safety precautions.
Should the appliance power supply cable need to be
replaced, this must be carried out by an authorised
service engineer or a qualified electrician. .
The appliance is supplied with a 13 amp plug fitted. In
the event of having to change the fuse in the plug sup-
plied, a 13 amp ASTA approved BS 1363/A fuse must
be used.
1
2
3
4
The wires in the mains lead are coloured in accordance
with the following code:
1 Blue - Neutral
2 cord clamp
3 Brown - Live
4 Green and Yellow - Earth
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol or coloured green and yellow.
The wire coloured blue must be connected to the termi-
nal «N» or coloured black.
The wire coloured brown must be connected to the ter-
minal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
Warning! A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safely.
18