16
Open the door and push the appliance against the side
of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the kit
included with the appliance. Snap vent grille (C) and
hinge cover (D) into position.
Press in the joint covers between the appliance and
the kitchen unit.
Apply covers (B) on joint cover lugs and into hinge
holes.
Position the runners (H) at the top and bottom of the
inside of the kitchen unit as shown in Fig. 6 and mark
the position of the external holes.
After preparing the holes, screw the runners to the
kitchen unit door using 3.5x16 mm screws.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
D108
C
D
D109
D013
B
B
D094
20mm
H
