Zanussi ZKG 2145, Руководство пользователя

Страница: 20 / 28

Open the pump door.
Put a container below the recess of the drain
pump to collect the water that flows out.
Press the two levers and pull forward the
drainage duct to let the water flow out.
When the container is full of water, put the
drainage duct back again and empty the con-
tainer. Do steps 3 and 4 again and again until
no more water flows out from the drain pump.
1
2
Pull back the drainage duct.
Unscrew the filter and remove it.
Remove fluff and objects from the pump.
Make sure that the impeller of the pump can
turn. If this does not occur, contact the serv-
ice centre.
2
1
Clean the filter under the water tap and put it
back in the pump into the special guides.
Make sure that you tighten correctly the filter
to prevent leakages.
Close the pump door.
Caution! When the appliance is in use
and depending on the programme
selected there can be hot water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When refitting
the pump cover, ensure it is securely re-
tightened so as to stop leaks and young
children being able to remove it.
20
www.zanussi.com