ENGLISH
19
4. Select the desired programme
Turn the programme selector dial to desired position:
the light corresponding to the different phases lights
up.
The display shows the duration of the programme.
5. Select the spin speed or the
(no spin)
Press the SPIN button repeatedly, in order to select
the desired spin speed or the
(no spin) option.
The relevant light will light up.
6. Select the desired options
The light corresponding to the depressed button
illuminates.
SUPER
RINSE
NIGHT
CYCLE
PREWASH
500
700
900
1200
SPIN
PREWASH
WASH
RINSE
RINSE HOLD
DRAIN
SPINNING
DRYING
END
A
B
C
D
F
G
H
K
L
M
N
P
Q
J
Operating sequence
Wash only
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out the prewash or the soak
(progr.
Q
), pour detergent into the appropriate
compartment marked
.
3. Measure out the additives
If required, pour fabric softener into the compartment
marked
without exceeding the «MAX» mark.
P1135
P1134
P0004
132900571.qxd 11/05/2004 10:55 Pagina 19
