background image

15

m

Frozen food must not be re-frozen once it has

been thawed out. 

m

Manufacturer’s storage recommendations

should be strictly complied with.

m

The lollies can cause frost burns if consumed

right away from the freezer.

m

Do not place carbonate or fizzy drinks in the

freezer as these may explode.

m

Whenever there is a need for discarding an old

freezer make sure to:

m

Take off the doors in order to prevent chil-

dren trapped inside.
Have the gas from the cooling system reco-

vered before making it to scrap iron.

m

Warnings for your safety

Warnings for your safety. Carefully read

these instructions before installing and

using the machine.

m

This freezer is designed to be operated by adults.

Children should not be allowed to tamper with the

controls or play with the product. 

m

Any electrical work required to install the applian-

ce should be carried out by a qualified electrician or

competent person.

m

This appliance is heavy. Care should be taken when

moving it.

m

Make sure that the cable is not trapped underneath

the appliance, nor touches the motor.

m

Repairs carried out by inexperienced persons may

cause injuries or serious malfunctioning. Refer to

the nearest Authorized Dealer. 

m

Make sure the rear part of the appliance stands

against a wall as there are working parts which heat

up and should not be of easy access. 

m

Make sure that there is a continous and adequate

ventilation as a failor to do so will result in compo-

nent failure and possible food loss.

m

The appliance should be left for at least 4 hours

after installation before it is turned on ill order to

allow the refrigerant to settle. 

m

This product must be serviced only by an authori-

zed NETWORK SERVICE CENTRE, and only

genuine SPARE PARTS must be employed. 

m

Before cleaning or reparing the appliance, 

make

sure it is unplugged. 

m

It is dangerous to alter the specifications or modify

this product in any way. 

m

These domestic refrigerators are designed to be used

specifically for the storage and conservation of food. 

m

DO NOT USE SHARP INSTRUMENTS to scrap

off frost or ice. Frost may be removed by using a

plastic scraper. (See defrosting instructions). 

Содержание ZD19/4R-1















Отзывы: