background image

9

Normal Operating Sounds

1.

Temperature control

May cause clicking sounds when the system is connected or disconnected.

2.

Cooling system

The injected cooling gas may produce a gurgling sound while passing through the tubes.

3.

Motor

May cause a humming noise and or slight knocking sound.

4.

Fans

You may occasionally hear the fans working. This is normal; the fans help to ensure the air circulates

more effectively.

Service and Spare Parts

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local

Zanussi Service Force Centre by telephoning:

08705 929929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area. 

For the address of your local Service Force Centre and further information about Service Force, please visit

the website at www.serviceforce.co.uk

Before calling out an engineer, please ensure you have read the details under the heading «Something Not Wor-
king».
When you contact the Service Centre you will need to give the following details.

1.

Your name, address and postcode

2.

Your telephone number

3.

Clear and concise details of the fault

4.

The model and serial number of the appliance (found on the rating plate)

5.

The purchase date

Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee ser-

vice calls.

Customer Care Department

For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, please
contact our Customer Care Department by letter or telephone at the address below or visit our website at

www.zanussi.co.uk

Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ

08705 727727 *

* Calls to this number may be recorded for training purposes.

Содержание ZCFF7/5W

















Отзывы: