Zanussi ZBA22421SA, Руководство пользователя

Страница: 8 / 12

ice that break away before defrosting is
complete.
4. When defrosting is completed, dry the
interior thoroughly.
5. Switch on the appliance.
6. Set the temperature regulator to obtain the
maximum coldness and run the appliance
for two or three hours using this setting.
7. Reload the previously removed food into the
compartment.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
• Disconnect the appliance from
electricity supply
• Remove all food
• Defrost (if foreseen) and clean the appliance
and all accessories
• Leave the door/doors open to prevent
unpleasant smells.
If the cabinet will be kept on, ask
somebody to check it once in a
while to prevent the food inside from
spoiling in case of a power failure.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem Possible cause Solution
The appliance does not operate. The appliance is switched off. Switch on the appliance.
The mains plug is not connec-
ted to the mains socket cor-
rectly.
Connect the mains plug to the
mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical appli-
ance to the mains socket. Contact
a qualified electrician.
The appliance is noisy. The appliance is not supported
properly.
Check if the appliance stands sta-
ble.
The compressor operates contin-
ually.
Temperature is set incorrectly. Refer to "Operation" chapter.
Many food products were put
in at the same time.
Wait some hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on the
rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
Water flows inside the refrigera-
tor.
The water outlet is clogged. Clean the water outlet.
Food products prevent that
water flows into the water col-
lector.
Make sure that food products do
not touch the rear plate.
8 www.zanussi.com