2
REPLACING OR CLEANING THE CARTRIDGE FILTER
22 Remove the dust container by pushing the open buttons
on the dust container handle.
23 Remove the contents of the dust container by pushing
the orange - coloured opening button.
24 Remove the protector mesh.
27 Remove the cartridge filter by turning it counter-
clockwise.
25 Shake the dirt from the filter and the mesh into a bin.
28 If necessary the filter and mesh can be rinsed, with cold
water, under a tap.
29 Air dry them for approximately 24 hours, to ensure it is
completely dry before re-using. Avoid direct sunlight
and extreme drying circumstances (e.q. hair-dryer).
27 Insert the cartridge filter back to the dust container and
turn it clockwise until the cartridge filter locks completely.
24 Insert the protector mesh into its place by pushing it
onto the cartridge filter.
26 Close the dust container lid until it clicks.
22 Insert the dust container back into the cleaner by
pressing it down until it clicks.
Cartridge filter reference number: F134
CLEANING THE EXHAUST FILTER
30 Open the filter grill.
31 Remove the exhaust filter.
32 Rinse it under tap water and dry it completely.
31 Put the filter back into the cleaner.
30 Close the filter grill.
Exhaust filter reference number: Menalux F134
TROUBLE FINDING YOUR MENALUX FILTERS?
If you do not find Menalux at your store, please call
your local customer service.
OPERATING THE HOSE IN/OUT OF THE SUCTION
INLET
33 To connect the hose into the suction inlet push it until it
clicks.
To disconnect the hose from the suction inlet push the
button at the end of the hose.
PROTECTING THE ENVIRONMENT
●
Attempt to recycle packaging material and old
appliances.
●
The cardboard packaging can be placed in the waste
paper collection.
●
Deposit the plastic bag made of polyethylene (PE) at the
PE collection point for recycling.
●
Deposit the polystyrene foam at the PS collection point
for recycling.
RECYCLING THE APPLIANCE AT THE END OF ITS LIFE:
●
The plastic components all carry a material
identification marking so that, like the other materials,
they can recycled at the end of the life of the appliance.
●
Please inquire with your local authority.
BLOCKED AIR FLOW AND DIRTY FILTERS
●
The cleaner stops automatically if a blockage occurs in
the nozzle/tube/hose or if the filters are blocked with dirt.
●
Disconnect from mains and allow the cleaner to cool for
20-30 minutes. Remove blockage and/or clean filters.
●
Restart the cleaner.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local city office, your household waste disposal
service or the shop where you purchased the product.
