background image

5

Blue:

Neutral

As the colours of the wires in the mains lead of this ap-

pliance may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green and yellow to the

terminal marked either with the letter “E“ or by the
earth symbol   or coloured green and yellow.

2. Connect the wire coloured blue to the terminal ei-

ther marked with the letter “N“ or coloured black.

3. Connect the wire coloured brown to the terminal ei-

ther marked with the “L“ or coloured red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp 

4

 is secure over the

outer sheath.

5. Make sure the electricity supply voltage is the same

as that indicated on the appliance rating plate.

6. Switch on the appliance.

The appliance is supplied with a 13 amp plug fitted

2

 . In the event of having to change the fuse in the

plug supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

Warning!  A cut off plug inserted into a 13 amp

socket is a serious safety (shock) hazard. Ensure

that it is disposed of safely.

Environmental concerns

The symbol     on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more

detailed information about recycling of this product,

please contact your local council, your household waste

disposal service or the shop where you purchased the

product.

8

 

Содержание ERC07002W8













Отзывы: