background image

21

If after all these checks, the problem persists,
contact your local Service Force Centre, quoting the
model and serial number. 

This information can be found on the rating plate
located on the right hand side of the dishwasher
door (see picture).

Service and spare parts

This product should be serviced by an 
authorised Service engineer, and only 
genuine spare parts should be used.
Under no circumstances should you 
attempt to repair the machine yourself. 
Repairs carried out by inexperienced 
persons may cause injury or serious 
malfunctioning. Contact your local Service 
Force Centre.
Always insist on genuine spare parts.

Protection against flooding

In order to prevent water floods, the machine has
been provided with two additional devices, having
the following characteristics:

1. In the water inlet hose (see "Water supply 

connections"). The device comes into operation 
as a result of any damage to the water inlet hose 
and stops the water inflow. It functions even with 
the machine off.
To repair the machine call the Service Centre.

2. In the bottom of the machine to protect against 

flooding. 

The device will operate if there are any water 
leaks in the machine, however it will only operate 
if the machine is on.

In case of malfunction, the washing and drying
phase indicator lights start flashing. 

To repair the dishwasher, turn off the water tap 
and call the Service Force Centre.

Prod.No. ........ Ser. No. .........

Mod. ........

RA01

Содержание DE 4654




























Отзывы: