Zanussi DA 6373, Инструкция

Страница: 5 / 24

5
Loading your appliance
Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
Do not load very small items which can fall
through the baskets.
The lower basket
The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can
turn freely.
The two rear rows of prongs on the lower basket can be
easily lowered to allow you to load pots, pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down
(see picture).
- To bring them back to the standing position, just pull
them up again.
The cutlery basket
Long bladed knives stored in an upright position
are a potential hazard.
These items should only be placed in the
removable knife basket.
Take care when loading or unloading sharp items
such as knives.
Cutlery should be placed in the removable cutlery basket
with the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
For best results we recommend you to use the cutlery grids
provided (if the size and the dimensions of the cutlery allow
it).
The cutlery basket is in two parts which can be separated to
give greater loading flexibility. To separate the two parts,
slide them horizontally in opposite directions and pull them
apart.
To reassemble, reverse the procedure.
Using your appliance
UI48
UI21
UI18
UI62
UI63
UI85