OPERATION
21
Synthesis
06/40V GAS
5.4 PROGRAMMING
The operating parameters that are programmed by the user are:
where:
A = -cooking time (mm:ss)
B = set temperature (XXX°C)
These parameters are normally indicated on the display when the oven is on and can be set
both when the oven is on or off.
Press the programming access key
to enter the
programming mode and move from one parameter to the next.
A horizontal line flashes below the parameter being
programmed.
To change the value, use the keys
to increase and
to
decrease.
By keeping the key pressed you increase the speed of data
change.
If no key is pressed for more than 5 seconds, the displayed
value is memorised and the oven automatically leaves the
programming mode.
During programming the keys
and
are
deactivated.
The order of programming is as follows:
1) Cooking time
2) Temperature
A
B
1
2
Содержание SYNTHESIS 06/40V GAS
Страница 35: ...MAINTENANCE 35 Synthesis 06 40V GAS Fig 10 1 Wiring diagram for synthesis 06 40V gas 230 Vac 1 N 50 60Hz...
Страница 38: ...MAINTENANCE 38 Synthesis 06 40V GAS FIG 10 2 Exploded view Synthesis 06 40V gas components of carpentry...
Страница 39: ...MAINTENANCE 39 Synthesis 06 40V GAS FIG 10 3 Exploded view Conveyor Synthesis 06 40V gas...
Страница 44: ...DECLARATION OF CONFORMITY 44 Synthesis 06 40V GAS 10 DECLARATION OF CONFORMITY...
