ZANOLLI CITIZEN EP 70/4, Руководство по установке, использованию и обслуживанию

Страница: 23 / 35

8. MAINTENANCE
CITIZEN EP70 23
1. Remove the right guard,
2. Unscrew the screws which attach the glass locking unit and lamp
holder.
3. Unscrew the 2 screws holding the bulb to the lamp holder and remove
the bulb, and replace it with another with the same characteristics.
4. Remount the glass locking unit and lamp holder careful the wires are in
the right position.
8.2
Safety thermostat
The safety thermostat intervenes when the temperature in the chamber
goes above 500°C and de-activates the resisters. The safety thermostat
has a manual reset and is sited inside the right hand panel.
To correct the error unplug the feed panel and wait for the chamber to
cool down.
Remove the side panel to the right of the control panel and press the red
safety thermostat button. Resetting will not occur until the temperature of
the chamber has dropped below 500°C.
Since the safety thermostat only intervenes where there are serious
malfunctions, carefully check the oven’s working and repair if necessary
before starting up the oven again.