Problem
Possible cause
Remedy
The display shows an error code
that is not in this table.
There is an electrical fault.
•
Deactivate the oven with the
house fuse or the safety switch
in the fuse box and activate it
again.
•
If the display shows the error
code again, contact the Cus-
tomer Care Department.
The appliance is activated and does
not heat up. The fan does not oper-
ate. The display shows "Demo".
The demo mode is activated.
1. Deactivate the oven.
2. Press and hold the button
.
3. When an acoustic signal
sounds, turn the knob for the
oven functions clockwise to the
first function. "Demo" flashes
in the display.
4. Turn the knob for the oven
functions to the off position.
5. Release the button
.
6. Turn the knob for the tempera-
ture clockwise and hold it for
three seconds. The acoustic
signal sounds three times. The
demo mode is deactivated.
Service data
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of the
appliance cavity. Do not remove the rating plate from
the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
Warning! Refer to Safety chapters.
21
Содержание KOB57602
