ZANKER KOB55602, Руководство пользователя

Страница: 14 / 36

Removing the shelf supports
1
Pull the front of the
shelf support away from
the side wall.
2
1
2
Pull the rear end of
the shelf support away
from the side wall and re-
move it.
Installing the shelf supports
Install the shelf supports in the opposite sequence.
The rounded ends of the shelf supports must
point to the front.
Oven lamp
Warning! Be careful when you change the oven
lamp. There is a risk of electrical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or deactivate the
circuit breaker.
Put a cloth on the bottom of the oven to prevent
damage to the oven light and glass cover.
Always hold the halogen lamp with a cloth to prevent
grease residue from burning on the lamp.
1. Turn the glass cover counterclockwise to remove
it.
2. Clean the glass cover.
3. Replace the oven light bulb with an applicable 300
°C heat-resistant oven light bulb.
Use the same oven lamp type.
4. Install the glass cover.
Cleaning the oven door
The oven door has two glass panels. You can remove
the oven door and the internal glass panel to clean it.
The oven door can close if you try to remove the
internal glass panel before you remove the oven
door.
Caution! Do not use the appliance without the
glass panels.
1
Open the door fully
and hold the two door
hinges.
2
Lift and turn the lev-
ers on the two hinges.
3
Close the oven door
to the first opening posi-
tion (halfway). Then pull
forward and remove the
door from its seat.
4
Put the door on a soft
cloth on a stable surface.
5
Release the locking
system to remove the in-
ternal glass panel.
90°
6
Turn the two fasten-
ers by 90° and remove
them from their seats.
14