FastICE Onboard Controls
The operator controls the real time functions of the system with seven switches in the two switch
banks and one rotary knob on the display. The enclosure for the display and switch banks also
features a USB port that allows an operator to insert a USB drive into the port immediately after an
ice resurfacing session, to download the data from that ice resurfacing session.
The following section depicts each control switch and button and describes its function.
Master Switch:
•
OFF – Disables the system
•
ON – Provides power to the system
USB Data Port
Master Power Switch
ON
OFF
Figure 1: Master Power Switch (shown in the OFF position) and USB data port
Training Manual
Zamboni FastICE
®
Training Manual
DK - 11001
Page 5 of 20
