Spray Boom Subassembly
The spray boom subassembly is secured to the conditioner by 2 receiver brackets that are mounted inside
the conditioner. The entire spray boom subassembly can be removed by 1 technician by disconnecting the
(2) quick disconnect couplings for the water hoses, disconnecting the connector for the board spray valve,
and pulling the (2) orange handle pull pins that are secured to the spray boom support structure with clip
rings:
Here is a closer illustration of the pull-pins:
Operating Manual
Zamboni FastICE
®
Operating Manual
DK - 11000
Page 30 of 44
