Canon Lens
Support
Sony F5/F55
Top Plate
This Sony Top Plate is a
top cheeseplate designed
specifically for the Sony
F55 and F5 camera bodies,
allowing the camera’s vent
area to remain open. The
plate offers rows of 1/4-20”
and 3/8-16” as well as
three rod ports. Paired with
the Top Plate is our Recoil
Handle, making the Sony
F55 or F5 more mobile
and easily handheld.
The Recoil Handle is a
quick release handle that
will work with any Z-Rail to
give you a top handle and
a unique dual cold shoe
accessory mount.
Opposite the cold shoe
mount is a 15mm rod
clamp for mounting a
Zacuto arm or other rods.
3/8”-16 and 1/4“-20
mounting holes are also
available. With the
connections on both the
Top Plate and Recoil
handle your accessory
options are seemingly
endles.
ZA
CU
TO
PROD
UC
T
IN
S TRUCTION
S
Z
Parts & Features
Assembling Top Plate & Handle
Check out our
tutorial videos
at zacuto.com
?
1
1
1
1
4
1
1
2
1
1
1
1
2
3
1
2
1
Tightening Lever
Rod Port 15mm
Tighten the four top plate screws
into the aligning holes mounting
holes on the top of the camera.
The top plate & handle will come assembled,
below is how its assembled with camera.
Attach the 5” Z-Rail’s two
1/4” 20 screws into any of
the top plates 1/4”-20 holes.
The Recoil handle is attached
after the top plate and z-rail.
See back for further Recoil
handle instruction.
I
3/16 Allen Wrench
5” Z-Rail
4.5” 15mm Rod
Top Plate Screws
1/4”-20 & 3/8”-16
Mounting Holes.
Cold Shoe
Accessory Jaws
Racheting Lever
Z-Rail Jaws
15mm Rod Ports
Racheting Lever
1/4”-20 & 3/8”-16
Mounting Holes
Removable Rod Port
with Racheting Lever
Cord Lock
(Sold Separately)
