ZA
CU
TO
PROD
UC
T
IN
S T RUCTION
S
Z
EVA1
Z-Finder
Check out our
tutorial videos
at zacuto.com
?
Parts and Features
x1
EVA1 Z-Finder
Mounting Frame
x1
Bracket Pin
Hole
x1
Bracket Screw
Hole
x1
Screen Latch
x1
EVA1 Z-Finder Rod
Adapter
x2
Tightening Lever
x2
Rod Ports
x2
Extender Frames
x2
Anti-Fog Shield
x1
Z-Finder Pro
x1
Focus Ring
x1
Eyecup & Lens Door
1
2
4
3
5
6
Orient EVA1 LCD as shown in picture.
Slide EVA1 rod adapter into LCD rod hole
and tighten knob.
Snap the Z-Finder Pro to the EVA1 Frame
To flip up the Z-Finder,
use red latch at the
bottom of the
Z-Finder Frame
Slide LCD and EVA1 rod adapter into
Z- Finder and tighten red knob.
Secure LCD by closing the black latch
on the bottom of the Z-Finder frame.
Mount EVA1 Z-Finder onto rod as shown
in picture and tighten red levers.
Assembling EVA1 Z-Finder
The EVA1 Z-Finder is
specifically designed to
convert the monitor
included with the EVA 1 to
an optical viewfinder. The
Z-Finder comes with a flip
up frame designed to
slide onto the EVA1 LCD
and lock securely in place.
The Z-Finder can pop on
and off the frame for quick
shooting.
This Z-finder will magnify
the LCD screen by 2x
and has a diopter for fine
focus tuning. It cuts out
any extraneous light
helpful for outdoor
shooting and offers an
initial point of stability by
pressing your eye against
the large eyecup. The
EVA1 Z-finder comes with
a 40mm diameter Zacuto
designed optic, anti-fog
coated protective lens,
and the mounting system
designed specifically for
the EVA1 LCD.
