Z3 Technology ZEUS DME-10-G Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 73

background image

DOC-USR-0214-04

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

th

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

13

Connect the 5V power supply, and turn on the power switch. It will take 20-30 seconds to boot.

Access the User Interface using ZFinder

ZFinder is a PC Utility that allows you to find any Z3 Technology product on your network. If you have
not downloaded this to your computer, you can find it on the USB drive provided with your system.

Verify your PC is set to DHCP. If it is set to a static IP address, ZFinder will be unable to discover

your encoder, or it will appear in red, and you will be unable to proceed further.

Run the “ZFinder” PC Utility on your Windows PC. The ZFinder window appears. ZFinder completes

a scan of the network and lists the location of all Z3 systems connected to the network. In this
case, the DME-10-G appears.

Click on the DME-10-G entry in the window to select it. This will cause the “Edit Device”, “Open

Device” and “Flash LEDs” boxes to activate.

Figure 5 ZFinder with DME-10-G Selected

*Note

:

Selecting “Edit Device” allows for manual changes to network settings including the Device

Name, IP Address, Netmask and Gateway address. Selecting “Flash LED’s” causes the status lights on
the encoder to flash and can be helpful if multiple devices are in use.

*Note:

If the device appears in red, there is a network error, and network settings will need to be

modified in order to access the user interface.

«
...
11
12
13
14
15
...
»

Содержание ZEUS DME-10-G










































































Отзывы:

Нет отзывов

Похожие инструкции для ZEUS DME-10-G

C7301U - Cd Rcvr W/ Custm Dsply

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: V-TAC Страницы: 3

Бренд: S.M.S.L Страницы: 31

Бренд: PBI Страницы: 31

Бренд: N-Tron Страницы: 2

Бренд: ICP DAS USA Страницы: 8

Бренд: Vanner Страницы: 28

Бренд: Plexim Страницы: 8

Бренд: Wisenet Страницы: 8

Бренд: Teac Страницы: 18

Бренд: A-TS TECHNOLOGY Страницы: 131

Бренд: Axis Страницы: 114

Бренд: Black Box Страницы: 10

Бренд: Accorroni Страницы: 44

Бренд: Innova Страницы: 20

Бренд: Kipor Страницы: 18

Бренд: Sungrow Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды