Z3Cam-LX User Instructions
DOC-USR-0155-05
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
66
default
Baud Rate
and
TCP Port
.
PtzTab
allows for the ability to enable/disable the PTZ hardware connected via a RS-485 connection along
with defining the device address being used on the RS-485 interface for each PTZ device; both
TCP Port
s
are required to be defined as the same
Serial Port
defined in the
TermTab
section above for the
RS-485
(PTZ)
functionality.
10.6
The CH1 Tab (Channel 1)
An asterisk (
*
) denotes a field available in Advanced Settings Mode. See Section 8.2 to access these fields.
Parameter
Options (default in bold)
Description
Encoder Setup
Output Resolution
320x180 – 2560x1440
Follow Input
The encode resolution. If this resolution is different
from the capture resolution (3840x2160), resizing
will occur.
Follow Input
generates the resolution
based on the capture resolution. [
Note 1
]
Video Codec
H265(HEVC)
H264(AVC)
MJPEG
Selects the codec used for compression of the
output video stream.
MJPEG is only available when RTP or RTSP are
selected as the Output format.
Video Profile*
(H264(AVC) Only)
High
Main
Baseline
The H.264 profile of the bitstream. Generally High
is used for 1080p or greater, Main for D1, and
Baseline for less than D1.
Video Rate Control
*
VBR
CBR
Selects the encoder rate control mechanism. VBR
(Variable Bitrate) means that the encoding bitrate
can fluctuate within the bitrate statistical period.
CBR (Constant Bitrate) means that a stable
encoding bitrate is ensured within the bitrate
statistical time.
Gradual Data
Refresh
*
True
False
Select
True
to enable refresh of the frame data
gradually.
Video Bitrate
(RTP, RTSP and RTMP
2K – 40M (
4M
)
Textbox for entering video bitrate. For example:
1M = 1,000,000 bits per second