Z3Dome-4K User Instructions
DOC-USR-0188-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
36
6.8
Record Snapshot
Z3Dome-4K supports taking a snapshot while streaming video.
By default, the snapshot will be at the native Z3Dome-4K camera resolution (3840x2160) with an option to
change the size of image.
There are two ways to record a snapshot:
(1)
Using Camera Tab (see section 7.2)
(2)
Using Z3Dome-4K URL as follows:
1.
Find the IP address of the camera (
using
Local IP Address
field in the
System
Setup
tab
or the ZFinder utility described in Section 5.2)
2.
Type the URL into a Web browser as:
Example if the camera IP address is 192.168.0.19 the URL to download a snapshot
is
http://192.168.0.19/snapshot.cgi
3.
The snapshot file will be downloaded with a default file name as:
snap_chn0_YYYY_MM_DD_HH_MM_SS.JPG
, where YYYY_MM_DD_HH_MM_SS are
Year, Month, Day, Hour, Minute and Second.
4.
To Change image size, use the
Size
parameter in URL, for example, in order to
change the image size to 1280x720 on above IP address type this:
http://192.168.0.19/snapshot.cgi
?size=1280x720.
6.9
Composite Pass-Through
The Z3Dome-4K allows for the currently encoded content to be passed through to the Composite output
while the unit is streaming. This allows the camera content to be viewed on a TV or other display
monitor.
(1)
To view this pass-through content, verify the unit is currently encoding. The channel status will
show
RUNNING
in the bottom right corner of the user interface.
(2)
Connect a composite video cable from
BNC
on the camera to a TV or display monitor.
Figure 30 Composite Pass-Through Connection
Composite Video
Output
