37
CONFIDENTIAL
DOC-USR-0133-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
(10)
In order for these changes to take effect, the unit must be re-started. Power the unit off
then back on and wait 45-60 seconds for the unit to boot up.
9.2
Using the Password Feature
The SBE264-DVR-13 includes an optional password to prevent unauthorized users from accessing the
HTTP-based user interface. The steps for using it are shown below:
(1)
In the System Setup tab, click on “go” next to “Set Password”:
(2)
The change password options appear. Enter the new password twice and click “change.”
(3)
Wait for the password options to disappear. This indicates that the password has changed.
(4)
Retype the IP address in the web browser or refresh the page. You should then see a prompt for a
user name and password. Use “admin” for the user name and the value you had entered previously
for the password.
(5)
You will now be able to access the user interface.
Click “change”
Click here
Figure 40
Selecting “Set Password”
Figure 41 Changing the Password
Enter new password twice
