40
CONFIDENTIAL
DOC-USR-0093-03
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
RUNNING THE CODE YOU BUILT ON THE BOARD (RPS ONLY)
11.0
There are two ways to take the image files you built in Section 5.0 and run them on the single board
encoder: (1) Updating the image file, and (2) Setting up NFS/TFTP to link to your development PC.
11.1
Method 1: Updating the Image File
Run the Web Interface (Steps (1)-(9) in Section 7.0).
(1)
Select “update device firmware” from the main screen:
(2)
This brings you to the Software Updater screen. Click “Browse” and browse to the directory z3-
(3)
netra-rdk/z3-netra-RDK-(date)/images and select the image file “z3-netra-upd.img”.
Click “Open.”
(4)
Click “Upload and Update.” You should see a “FLASH Update now in progress” message. Once
(5)
finished it will go back to the main menu.
You should be able to now run using the updated image.
(6)
Figure 31 Updating the Device Firmware from the Web Interface
Click
here
