
DOC-USR-0027-10
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
38
configurations are possible (see Note 2).
Set Display
(Decode Only)
If a display mode, resolution, or layout different
from the default is desired, the user would
change to the desired value and then click the
“Set Display” button. This should be clicked
before starting a decode.
Set Device Name
Sets the name for the Z3-MVPR-02.
Set Password
Sets the system password. See Section 8.3,
“Using the Password Feature” on page 35 for more
details.
update device firmware
See Section 8.2, “Making a Firmware Update” on
p.33.
download device logs
Clicking this causes the Z3-MVPR-02 to extract a
set of diagnostic logs that can be sent to Z3
Technology in the event of an issue to be
reported. This file is saved on the PC which the
GUI is being run from.
Note 1: Resolutions supported:
1080p60, 1080i30, 1080i29.97, 1080i25, 1080p60, 1080p59.94, 1080p50,
720p60, 720p59.94, 720p50, 480p60, 576p50
Note 2: Layouts supported:
1x1, 2x2, 4x4, 2x2+4, 1+5, 1+7, 3x3, 1+2PIP, 1+4PIP
9.2
The User Presets Tab
Parameter
Options (default in bold)
Notes
new
Define a new configuration file. Up to 9
configurations can be created.
rename
Rename a configuration file.
delete
Delete a configuration file.
export
Export current settings to a file.
import
Load settings from a previously exported file.