DOC-USR-0027-10
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
24
6.10
Running DHCP
DHCP is also supported. When enabled, the Z3-MVPR-02 dynamically receives an IP address to use at
startup. The IP address that is assigned can be seen through the ZFinder tool running on a PC. To view
how DHCP support works, you can do the following steps:
(31)
The first thing you need to do is set up a custom configuration so that the DHCP setting is used
the next time the system boots up. To do this, click on the “User Presets” tab and click on
“new”:
(32)
This brings up a new text box to enter the preset name. Type “z3_config1” and click “ok”:
(33)
Return to the System Setup tab. Go to the bottom of the screen and select as the preset the
“z3_config1” configuration you just created:
Figure 22 The User Presets Tab
Figure 23 Entering a User Preset Name
(1) Type “z3_config1”
(1) Click on “User Presets”
Tab
(2) Click on “new”
(2) Click “ok”
