DOC-USR-0027-10
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
11
6.0
RUNNING THE ENCODER
This section gives step-by-step instructions on taking the Z3-MVPR-02 and using it to stream 1080p or 1080i
video to VLC running on your PC. In addition to the Z3-MVPR-02, an HD source with HDMI output and a PC
are required. Encoding with a component or a composite source is described in Section 6.11 on page 28.
Please Note:
Actual version numbers for your Z3 product may differ from those pictured in this document.
6.1
Set up the HD Source
(1)
Select an HD source with HDMI output
-Power on the HD Source
-Connect HDMI to a monitor
-Set the HD Source to 1080i output
-Select content you would like to stream
If you see playback on the monitor, you have confirmed the source works.
6.2
Connect and Power Up the Z3-MVPR-02
(2)
Connect the HDMI source to “HDMI In” on the front of the Z3-MVPR-02:
(3)
Connect an Ethernet cable connected through a hub or router to a PC to “Ethernet” on the back of
the Z3-MVPR-02 (see above).
(4)
Connect the 12V power supply and turn on the switch in the front.
(5)
Wait around one minute.
(2) Connect
Ethernet
(3) Connect
12V Pwr
(1) Connect
HDMI Source
Figure 5 Encode Connections for the Z3-MVPR-02
