Z3 Technology Z3-MVE-40 Скачать руководство пользователя страница 61

Страница: 61 / 61

DOC-USR-0068-02

_______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

APPENDIX C: Troubleshooting



Problem:

Web interface does not come up

-Is the Ethernet cable plugged into the Z3-MVE-40 solidly (do you see the link light on the Ethernet

cable which indicates data is being transmitted)?

-Does the Z3-MVE-40 IP address and PC IP address have the same first two values (or, if netmask is set

to 255.255.255.0, the same first three values)?

-Do the Z3-MVE-40 and the PC running VLC have the same netmask? (Default value in the Z3-MVE-40 is

255.255.0.0)

-Can the MVE-40 and the PC see each other?

-Try pinging the Z3-MVE-40 from the PC.

-Try pinging the PC from the Z3-MVE-40 (serial interface required for this – see Z3 for more

details).

-Are all firewalls on the network turned off?

-Try connecting the PC directly to the board without any routers, etc.



Problem:

Do not see video in VLC (UDP)

-Does the IP address set in “Dest Address” equal the IP address of the PC running VLC?

-Does the port number in “Dest Port” equal the value entered in the URL for VLC?

-Does the video coming out of the source match the resolution in the encoder settings?

-Is the PC fast enough for 1080p decode on VLC?

-Does the PC have enough DDR to handle 1080p decode on VLC?

-Is VLC version 1.1x or later?



Problem:

Do not see video in VLC (RTP)

-Is “Dest Port” set to 5004?

For information regarding your hardware warranty, please visit:

www.Z3technology.com/Support/HW-Warranty.html

When contacting Z3 Support for additional support, please click the “download device logs” button in the
GUI at the time the problem occurs and send the resulting .gz file, along with screenshots of the settings
used to Z3 Technology.

Содержание Z3-MVE-40






























































Результаты поиска

Содержание Z3-MVE-40

Отзывы:

Похожие инструкции для Z3-MVE-40

Бренды по названию

Популярные бренды

Z3 Technology Z3-MVE-40, Инструкция пользователя

Результаты поиска

Содержание Z3-MVE-40

Отзывы:

Похожие инструкции для Z3-MVE-40

Бренды по названию

Популярные бренды