CONFIDENTIAL
DOC-USR-0010-09
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
19
7.8
Streaming RTP
Once you have UDP streaming, it is relatively simple to change to RTP streaming. All that is needed are
a change of settings and an SDP file (an example file is provided with the software release from Z3). To
stream using RTP, do the following steps:
(17)
In the Encoder settings tab, click on “Stop” to stop the current encoding session.
(18)
Change “Output Format” from “MPEG-2 TS” to “RTP” (see
.
(19)
Change “Dest IP Address” to “225.1.2.3”.
(20)
Confirm that “Dest Port” (see
) is “8888” (this will be important for the VLC
configuration).
(21)
Click “Start” to start streaming.
(22)
Copy the “z3-netra-multicast.sdp” file received from Z3 to your PC.
(23)
Open VLC. Select “Media – Open File” and select the “z3-netra-multicast.sdp” file you just
copied.
(24)
You should then see RTP video streaming on VLC:
Figure 11 Example of Z3 Video Streaming to VLC (RTP)
