CONFIDENTIAL
DOC-USR-0008-08
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
45
10.0
RUNNING THE CODE YOU BUILT ON THE BOARD
There are two ways to take the image files you built in Section 5.0 and run them on the board: (1)
Updating the image file, and (2) Setting up NFS/TFTP to link to your development PC.
10.1
Method 1: Updating the Image File
(1)
Run the Web Interface (Steps (1)-(10) in Section 7.0).
(2)
Select “update device firmware” from the main screen:
Figure 42 Updating the Device Firmware from the Web Interface
Click here