CONFIDENTIAL
DOC-USR-0064-02
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
21
7.9
Using DHCP
The Z3-DM368-SDI-RPS also supports using DHCP to acquire an IP address at boot-up. To use it, follow
the steps below:
Click the “Use DHCP” check box in the Web GUI. Once it is checked, you will see that the values
of Local IP Address, Local Netmask, and Default Gateway will gray out:
Click on “Save User”. Wait a couple seconds for the “Saved all to User” message to appear:
Power off the Z3-DM368-SDI-RPS.
Power back on the Z3-DM368-SDI-RPS. Wait about one minute for the “ready” LED to turn on.
(1) Click “Save User”
(2) Wait for “Saved all to User” to appear in status
(1) Check “Use
DHCP”
Figure 13 Saving “Use DHCP”
Figure 12 Using DHCP
(2) Values gray out
