16
DOC-USR-0264-02
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
10.0
CODE OVERVIEW
Once you have untarred the code, you will see the following top-level directories:
ambarella Ambarella main code directory
external Opensource build of busybox
scripts Build scripts
Under the ambarella directory, you will see these directories:
ambarella/out/cv22_walnut
Ambarella build products directory
ambarella/out/cv22_walnut/fakeroot Ambarella root filesystem install directory
ambarella/boards/cv22_walnut Ambarella global configuration/device tree setup
ambarella/amboot
Ambarella bootloader
ambarella/kernel/linux Ambarella Linux kernel source code
ambarella/prebuild
Ambarella open-source prebuilt components
ambarella/rootfs
Ambarella root filesystem build scripts
ambarella/unit_test
Ambarella unit test application source code
The Z3 applications are run by the systemd initialization scripts.
The systemctl application can stop, start, or restart the Z3 applications.
systemctl stop <service name>
systemctl start <service name>
systemctl restart <service name>
Note that once a service is started, you must run “systemctl
restart <service name>” to start it again
--
the start action will do nothing if it has already been started.
Service Name
Description
mcsenc.service
Z3 streaming encode application
z3_onvif.service
Z3 ONVIF server
haproxy.service
Z3 web proxy service
factory-console.service
Z3 functional test service
videodetect.service
Z3 video source mode detection service
webui.service
Z3 web interface service
boxd.service
Z3 LED control and reset to defaults service
finder.service
Z3 Finder service
10.4
ambarella/out/cv22_walnut/images
This directory contains the AmbaUSB factory flasher images
