Z3 Technology EUS Z3-MVE-150, Инструкция пользователя

Страница: 62 / 79

DOC-USR-0094-08
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
62
9.3 The Status Tab
Note: May take a few seconds to load after being clicked
Output Value Explanation
Video Status
CH The channel number (1 or 2)
Bitrate (Kbps) Current target bitrate of encoder in Kbps
Actual Bitrate Actual bitrate being output by encoder in Kbps
FPS Current target frames per second of encoder
Actual FPS Actual frames per second being encoded
Key-frame FPS Number of key-frames per second (for example, a value of 0.5 means a key frame
is inserted every two seconds)
Width Width of encoded picture
Height Height of encoded picture. A small “i” will appear if interlaced is being encoded.
Audio Status
Channel The channel number (1 or 2)
Subchannel Always 1 in this release
Codec The codec being used to encode audio for that channel
Stream Status
Channel The channel number (1 or 2)
URL URL the channel is being streamed to
frames Number of frames sent from encoder to channel since the beginning of encoding.
This can serve as a quick sanity check (for example, you can click “Refresh”,
count to 10, click “Refresh” again, and you should see an increase of around 600
for 60 frames per second content).
Input Status
Input Input type
Resolution Capture resolution for that input
FPS Capture frames per second for that input
Parameter Options (default in bold) Description
Refresh Button Click button to manually refresh information.
Auto Refresh Checked
Unchecked
Sets whether the status tab will automatically
refresh information once every ten seconds.